Our products are tried tested, and qualified; adhering to all relevant industry standards including ISO24817 and ASME PCC-2. Below you find a list of case studies of FutureWrap applications in a variety of conditions. For any enquiries, or further information, please feel free to contact us and we will answer your queries questions as soon as we can.
8 inch sea water return line
An 8-inch sea water return line was suffering from both internal and external corrosion. A temporary repair had been
applied to the line to seal the through…
42 inch hot air line
A 42 inch hot air line was suffering from both external corrosion. Close to a
flange face over time the external corrosion had created a through…
Drilling mud tank
A CSU drilling mud tank, 2.8 meter diameter, which had been out of service for several years was to be re-commissioned. There were several holes…
16 inch crude oil spearator
A 16 inch crude oil separator line was
suffering from internal corrosion. The
measured remaining wall thickness was
3.4 mm. It was estimated that…
Foam tank
A stainless steel foam rectangular tank, 1.2
meter high was suffering from cracking of
the welds. The cause of these defects was
combined manufacturing defects…
14 inch production line
A 14 inch section of duplex pipework
containing gas had mechanical
cracking at one of the welds. An
engineered Futurewrap repair…
36 inch reducer
The weld of a 36 inch cooling water line
was suffering from severe external
corrosion. The corrosion had reduced the
wall thickness such that the weld…
30 inch straight
The weld of a 30 inch straight section of
pipework containing cooling water was
suffering from severe external corrosion.
The corrosion had reduced…
16 inch crude oil spearator
A 16 inch crude oil separator line was
suffering from internal corrosion. The
measured remaining wall thickness was
3.4 mm. It was estimated that…
32 inch glycol still column
A 32 inch line off a glycol still column was
suffering from external corrosion. A
previous composite repair had been
applied and reached the end…
24 inch drilling mud line
A 24 inch drilling mud line was suffering
from external corrosion. It was proposed
to use Futurewrap composite repairs over
4 defects…
6 inch stub
Two 6 inch blanked off stubs at the 6
o’clock position of a gas header vessel on
a FPSO off the west coast of Africa were
suffering…
36 inch produced water caisson (upper section)
Two 6 inch blanked off stubs at the 6
o’clock position of a gas header vessel on
a FPSO off the west coast of Africa were
suffering…
36 inch produced water caisson (lower section)
The lower section of a 36-inch produced
water caisson was suffering from external
corrosion. It was proposed to use a
Futurewrap…